MC-2500 truMedic Massage Chair

Troubleshooting

My massage chair doesn’t work when plugged in and turned on	The remote control may not be turned on.  Locate and press the on switch on your remote control. You may not have chosen a massage function yet.  Press any massage function to initiate the massage experience. The chair is not receiving the right amount of electricity.  Check the chair and wall outlet connections for contact. The chair has a burned out fuse.  Replace it with the appropriate fuse. The problem is within the inner circuit.  Repair with an authorized maintenance professional is required.
Beeping noises inside the chair during massage sessions.	You are probably hearing the air pump, mechanical parts and motor.  This is completely normal.
Difference in left/right motors.  One is sometimes higher than the other is	The massage rollers do not always run symmetrically.  This is completely normal.
The sound I was hearing inside the chair is much louder now	You may have used the chair continually for too long.  Power down the chair for at least 30 minutes, and then see if you still notice the sound. Over time, the internal parts can wear down with consistent use. Some wear and tear is normal.  An authorized maintenance professional is required for repairs.
My massage unexpectedly stopped during a session	The chair may have lost electricity. Check the power cord for a secure connection. You may have used the chair continually for too long.  Allow the chair to rest for at least 30 minutes before restarting it.
I cannot move the backrest or leg rest as intended	Check the surrounding area for clearance.  Remove any obstacles that may inhibit the chair from moving adequately. The chair may have automatically stopped.  Turn off the power to the chair and wait for at least 30 minutes before restarting it.
I cannot get the chair to return to it’s default position	This may happen if you use the chair continuously for too long or if the massage time frame has ended.  If you cannot get the chair to return to its normal position after waiting 30 minutes, an authorized maintenance profession is required.
The electric wires and/or plugs are really hot	This can occur if you use the chair continuously for too long. Turn off all power, and allow the chair to rest for at least 30 minutes. If you notice significant heat during any kind of chair usage, stop using the chair immediately.  A maintenance professional is required.